2024
(2024) Evolution of a Survey for Self-Reported Engineering Design Space Exploration Tendency, 2024 South East Section Meeting Proceedings, ASEE Conferences, doi:10.18260/1-2–45524
(2024) An Approach for Integrating Analytical and Experiential Knowledge for Structural Design, Computer-Aided Design and Applications, p. 42-67, doi:10.14733/cadaps.2025.42-67
2023
(2023) A Comparative Design Study of Topologically Dissimilar Automotive Structures, Computer-Aided Design and Applications, p. 374-391, doi:10.14733/cadaps.2024.374-391
(2023) Simulating the Adoption and Social Impact of Improved Cookstoves in Uganda Using Agent-Based Modeling and Neural Networks, Journal of Mechanical Design 145(12), url, doi:10.1115/1.4063237
(2023) Fifty-Five Prompt Questions for Identifying Social Impacts of Engineered Products, Journal of Mechanical Design, p. 1-11, url, doi:10.1115/1.4063453
(2023) Advancing Sustainable Development: Emerging Factors and Futures for the Engineering Field, Sustainability 2023, Vol. 15, Page 7869 15(10), p. 7869, Multidisciplinary Digital Publishing Institute, url, doi:10.3390/SU15107869
(2023) Agent-Based Product-Social-Impact-Modeling: A Systematic Literature Review and Modeling Process, Journal of Mechanical Design 145(11), American Society of Mechanical Engineers Digital Collection, url, doi:10.1115/1.4063004
(2023) Simulating the Adoption and Social Impact of Improved Cookstoves in Uganda Using Agent-Based Modeling and Neural Networks, Journal of Mechanical Design 145(12), American Society of Mechanical Engineers Digital Collection, url, doi:10.1115/1.4063237
(2023) Similarity-Driven Topology Optimization for Statics and Crash via Energy Scaling Method, Journal of Mechanical Design 145(10), doi:10.1115/1.4062943
(2023) Learning hyperparameter predictors for similarity-based multidisciplinary topology optimization, Scientific Reports 13(1), p. 14856, doi:10.1038/s41598-023-42009-0
(2023) Repeatability and variability of the 3-Min all-out test at the subject level, Journal of Science in Sport and Exercise 5(1), p. 77-86, Springer Nature Singapore Singapore, doi:10.1007/s42978-021-00156-8
(2023) Systematic Review and Classification of the Engineering for Global Development Literature Based on Design Tools and Methods for Social Impact Consideration, Journal of Mechanical Design, Transactions of the ASME 145(3), doi:10.1115/1.4055325
(2023) Trade-Off Characterization Between Social and Environmental Impacts Using Agent-Based Product Adoption Models and Life Cycle Assessment, Journal of Mechanical Design, Transactions of the ASME 145(3), doi:10.1115/1.4056006
2022
(2022) Aligning learning objectives and approaches in global engineering graduate programs: Review and recommendations by an interdisciplinary working group, Development Engineering 7, p. 100095, Elsevier, doi:10.1016/J.DEVENG.2022.100095
(2022) Curating Datasets of Flexible Assemblies to Predict Spring-Back Behavior for Machine Learning Purposes, Volume 2: Manufacturing Processes; Manufacturing Systems 13(1), p. 104-116, American Society of Mechanical Engineers, url, doi:10.1115/MSEC2022-85718
(2022) Generalization of Manufacturability Algorithms for Fabricated Assemblies based on Topology Optimization, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, St. Louis, MO: ASME
(2022) OSU-Honda automobile hood dataset (CarHoods10k), Dryad Dataset, doi:10.5061/dryad.2fqz612pt
(2022) CarHoods10k: An Industry-grade Data Set for Representation Learning and Design Optimization in Engineering Applications, IEEE Transactions on Evolutionary Computation, p. 1-1, url, doi:10.1109/TEVC.2022.3147013
(2022) Generalizing Machine Intelligence Techniques for Automotive Body Frame Design, url
(2022) The use of virtual reality to support engineering design reviews, Proceedings of the Ground Vehicle Systems Engineering and Technology Symposium, p. 16-18, pdf
(2022) Optimal Pacing of a Cyclist in a Time Trial Based on Individualized Models of Fatigue and Recovery, IEEE Transactions on Control Systems Technology 31(1), p. 317-332, IEEE, doi:10.1109/TCST.2022.3178930
(2022) Assessing Global Needs When Identifying Potential Engineering for Global Development Projects, Journal of Mechanical Design, Transactions of the ASME 144(3), doi:10.1115/1.4052223
(2022) SYSTEMATIC REVIEW AND CLASSIFICATION OF THE ENGINEERING FOR GLOBAL DEVELOPMENT LITERATURE BASED ON DESIGN TOOLS AND METHODS FOR SOCIAL IMPACT CONSIDERATION, Proceedings of the ASME Design Engineering Technical Conference 3-B, doi:10.1115/DETC2022-90683
(2022) TRADE-OFF CHARACTERIZATION BETWEEN SOCIAL AND ENVIRONMENTAL IMPACTS USING AGENT-BASED MODELS AND LIFE-CYCLE ASSESSMENT, Proceedings of the ASME Design Engineering Technical Conference 5, doi:10.1115/DETC2022-89975
(2022) EXPLORING THE USEFULNESS OF AGENT-BASED PRODUCT SOCIAL IMPACT MODELING THROUGH A SYSTEMATIC LITERATURE REVIEW, Proceedings of the ASME Design Engineering Technical Conference 3-B, doi:10.1115/DETC2022-90001
(2022) Approaches for simulation model reuse in systems design—A review, SAE International Journal of Advances and Current Practices in Mobility 4(2022-01-0355), p. 1457-1471, url, doi:10.4271/2022-01-0355
(2022) Developing Domain Ontologies and an Integration Ontology to Support Modeling and Simulation of Next-Generation Ground Vehicle Systems, SAE WCX, doi:10.4271/2022-01-0361
2021
(2021) A computational simulation-based framework for estimating potential product impact during product design, Design Science 7, p. e15, Cambridge University Press, url, doi:10.1017/DSJ.2021.16
(2021) A FRAMEWORK FOR PREDICTING POTENTIAL PRODUCT IMPACT DURING PRODUCT DESIGN, Proceedings of the Design Society 1, p. 101-110, Cambridge University Press, url, doi:10.1017/PDS.2021.11
(2021) Design exploration and prediction of automotive hood designs based on non-uniform feature parameters, Proc. NAFEMS World Congress
(2021) Intelligent Design Prediction Aided by Non-uniform Parametric Study and Machine Learning in Feature Based Product Development, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
(2021) Computationally Assisted Retrieval and Reuse of 3D Solid Models and Assembly Work Instructions, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 85376, p. V002T02A014, doi:https://doi.org/10.1115/DETC2021-70480
(2021) W’Reconstitution Is Exponential and Depends on Recovery Intensity and Duration Response, Medicine and Science in Sports and Exercise 53(2), p. 456, doi:https://doi.org/10.1249/mss.0000000000002505
2020
(2020) Multi-material Topology Optimization in LS-TaSC using Ordered SIMP Interpolation, 16th International LS-DYNA Users Conference, pdf
(2020) Design Science meets Data Science: Curating Large Design Datasets for Engineered Artifacts, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
(2020) Interoperability of CAD geometry and product manufacturing information for computer integrated manufacturing, International Journal of Computer Integrated Manufacturing 33(2), p. 116-132, doi:10.1080/0951192X.2020.1718760
(2020) A finite element simulation model of convective heat-assisted single-point incremental forming of thermoplastics, The International Journal of Advanced Manufacturing Technology 111, p. 3305-3317, Springer London, doi:https://doi.org/10.1007/s00170-020-06311-9
(2020) Effects Of w’Depletion On The Torque Velocity Relationship In Cycling, Medicine & Science in Sports & Exercise 52(7S), p. 264, LWW
(2020) Modeling the recovery of W’in the moderate to heavy exercise intensity domain., Medicine and Science in Sports and Exercise 52(12), p. 2646-2654, doi:https://doi.org/10.1249/mss.0000000000002425
(2020) Experimental investigation and finite element modeling of localized heating in convective heat-assisted single-point incremental forming, The International Journal of Advanced Manufacturing Technology 107, p. 945-957, Springer London, doi:https://doi.org/10.1007/s00170-020-05082-7
(2020) Assessing global needs when identifying potential engineering for global development projects, Proceedings of the ASME Design Engineering Technical Conference 11B-2020, doi:10.1115/DETC2020-22062
2019
(2019) Load Case Preference Patterns based on Parameterized Pareto-Optimal Vehicle Design Concept Optimization, European LS-DYNA Conference, pdf
(2019) Automating Parametric Redesign of Structural Thin-Walled Frames, ASME 2019 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference
(2019) Automatically Generating 60,000 CAD Variants for Big Data Applications, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
(2019) Automated Tolerance Analysis of Mechanical Assemblies from a CAD Model with PMI, Computer-Aided Design and Applications 17(2), p. 249-273, doi:10.14733/cadaps.2020.249-273
(2019) In-Plane Pure Shear Deformation of Cellular Materials with Novel Grip Design, 2019 International Solid Freeform Fabrication Symposium, doi:http://dx.doi.org/10.26153/tsw/17481
(2019) Comparison of room temperature and heat assisted single point incremental forming of thermoplastics, Advanced Manufaturing Technology 33, p. 346-351, doi:10.3233/ATDE190061
(2019) Experimental Investigation of a Backing Sheet Stiffener in Incremental Forming of Polycarbonate, ASME International Mechanical Engineering Congress and Exposition 59377, p. V02AT02A038, doi:https://doi.org/10.1115/IMECE2019-11231
(2019) A survey of mathematical models of human performance using power and energy, Sports medicine-open 5(1), p. 54, Springer International Publishing Cham, doi:https://doi.org/10.1186/s40798-019-0230-z
(2019) Experimental modeling of cyclists fatigue and recovery dynamics enabling optimal pacing in a time trial, 2019 American Control Conference (ACC), p. 5083-5088, doi:10.23919/ACC.2019.8814854
2018
(2018) Detail Design Evaluation of Extruded Sections on a Body-in-White Concept Model, 15th International LS-DYNA Users Conference
(2018) Automated cross-sectional shape recovery of 3D branching structures from point cloud, Journal of Computational Design and Engineering 5(3), p. 368-378, url, doi:10.1016/j.jcde.2017.11.010
(2018) Comparative Study of Tolerance Analysis Methods Applied to a Complex Assembly, 15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT, doi:10.1016/j.procir.2018.04.073
(2018) Design Domain Dependent Preferences for Multi-Disciplinary Body-in-White Concept Optimization, 15th International LS-DYNA Users Conference
(2018) Mathematical Tools for Automating Digital Fixture Setups: Constructing T-Maps and Relating Metrological Data to Coordinates for T-Maps and Deviation Spaces, Journal of Computing and Information Science in Engineering 18(4), doi:10.1115/1.4038821
(2018) Modeling the expenditure and recovery of anaerobic work capacity in cycling, Proceedings 2(6), p. 219, doi:https://doi.org/10.3390/proceedings2060219
(2018) An experimental protocol to model recovery of anaerobic work capacity, Proceedings 2(6), doi:https://doi.org/10.3390/proceedings2060208
2017
(2017) Validity and reproducibility of the Garmin vector power meter when compared to the SRM device, Journal of Sports Sciences 5, p. 235-241, doi:10.17265/2332-7839/2017.05.001
2016
(2016) Method for automating digital fixture-setups that are optimal for machining castings to minimize scrap, Journal of Manufacturing Systems 40(2), p. 15-24, url, doi:10.1016/j.jmsy.2016.05.004
(2016) Automating Fixture Setups Based on Point Cloud Data & CAD Model, p. 83, url
(2016) The Set-Up-Map for Automating the Positioning of Castings and Weldments in Fixtures to Ensure Completely Machined Surfaces, Volume 1A: 36th Computers and Information in Engineering Conference, American Society of Mechanical Engineers, doi:10.1115/DETC2016-59695
(2016) Design problems as potential moderators in creativity studies, DS86: Proceedings of The Fourth International Conference on Design Creativity, Georgia Institute of Technology, Atlanta, GA, USA, url
(2016) Predicting the Expenditure of Anaerobic Work Capacity (AWCexp) based on Changes to the Torque-Velocity Curve
(2016) Protocol to Determine Changes to the Torque Velocity Curve above Critical Power while Cycling
(2016) Comparison of Threshold Determinations between Blood Lactate/Ventilatory and Near Infrared Spectroscopy
(2016) Heat Assisted Single Point Incremental Forming of Polymer Sheets, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 50145, doi:https://doi.org/10.1115/DETC2016-60031
(2016) Similarity of engineering design problems to enable reuse in design research experiments, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 50190, p. V007T06A042, doi:https://doi.org/10.1115/DETC2016-60474
(2016) Validity And Reliability Of A Pedal-based Power Meter During Maximal Ergometer Testing: 394 Board# 231 June 1, 11: 00 AM-12: 30 PM, Medicine & Science in Sports & Exercise 48(5S), p. 107, LWW
(2016) Comparison Of Ventilatory Thresholds Via V-slope Method To Lactate Thresholds With NIRS: 395 Board# 232 June 1, 11: 00 AM-12: 30 PM, Medicine & Science in Sports & Exercise 48(5S), p. 107-108, LWW
(2016) A knowledge based FMEA to support identification and management of vehicle flexible component issues, Procedia Cirp 44, p. 157-162, Elsevier, doi:https://doi.org/10.1016/j.procir.2016.02.112
(2016) Computing similarity of text-based assembly processes for knowledge retrieval and reuse, Journal of Manufacturing Systems 39, p. 101-110, Elsevier
(2016) Measuring the effects of goal alignment on innovative engineering design projects, The International journal of engineering education 32(1), p. 55-63, Instituto de Relaciones Internacionales” Daza de Valdes”
(2016) Retrieval of solid models based on assembly similarity, Computer-Aided Design and Applications 13(5), p. 628-636, Taylor & Francis
2015
(2015) Text analysis of assembly work instructions, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 57052, p. V01BT02A003
(2015) Control of thermoforming process parameters to increase quality of surfaces using pin-based tooling, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 57113, p. V004T05A016
(2015) Toward automating affordance-based design, AI EDAM 29(3), p. 297-305, Cambridge University Press
(2015) Clemson Engineering Design—Applications and Research (CEDAR) Group—Clemson University, Clemson, SC, USA, Impact of Design Research on Industrial Practice: Tools, Technology, and Training, p. 151-168, Springer International Publishing Cham
(2015) Design and implementation of a line balance visualization and editing tool, ICoRD’15–Research into Design Across Boundaries Volume 2: Creativity, Sustainability, DfX, Enabling Technologies, Management and Applications, p. 275-289
2014
(2014) Integrated idea generation method for concept generation using morphological and options matrices, Proc. TMCE, p. 1-12
(2014) Ontological Knowledge Representation and Inference Rules for MTM Decision Support System, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 46292, p. V01BT02A015
(2014) Challenges in Designing and Manufacturing Fully Optimized Functional Gradient Material Objects, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 46322, p. V02BT03A016
(2014) Decision Support Development for Product-Process Coupling in Mass Customized Automotive Assembly, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 46353, p. V004T06A040
(2014) Manufacturing assembly time estimation using structural complexity metric trained artificial neural networks, Journal of computing and information science in engineering 14(1), p. 11005, American Society of Mechanical Engineers
2013
(2013) Optimal pacing in a cycling time-trial considering cyclist’s fatigue dynamics, 2013 American Control Conference, p. 6442-6447
(2013) Knowledge management for semi-automated automotive assembly instruction authorship and translation, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 55911, p. V004T05A004
(2013) Knowledge base representation for axiomatic design through ontologies, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 55867, p. V02BT02A016
(2013) Automated Navigation of Method Time Measurement Tables for Automotive Assembly Line Planning, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 55911, p. V004T05A019
(2013) Decision support systems for assembly line planning: Modular subsystems for a large-scale production management system
(2013) Factors that effect motivation and performance on innovative design projects, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 55843, p. V001T04A019
(2013) Use of big data and knowledge discovery to create data backbones for decision support systems, Procedia Computer Science 20, p. 446-453, Elsevier
(2013) Automotive lightweight engineering: a method for identifying lazy parts, International journal of vehicle design 63(4), p. 364-386, Inderscience Publishers Ltd
(2013) A formal representation of function structure graphs for physics-based reasoning, Journal of Computing and Information Science in Engineering 13(2), p. 21001, American Society of Mechanical Engineers
(2013) Physics-based reasoning in conceptual design using a formal representation of function structure graphs, Journal of Computing and Information Science in Engineering 13(1), p. 11008, American Society of Mechanical Engineers
(2013) Concept generation through morphological and options matrices, ICoRD’13: Global Product Development, p. 199-210
2012
(2012) The Effects of Language and Pruning on Function Structure Interpretability, Jun 2012, 134(6): 061001 (11 pages) 134(6), doi:https://doi.org/10.1115/1.4006442
(2012) Concept generation using morphological and options matrices
(2012) A Case Study in Challenging Engineering Requirements, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 45011, p. 715-725
(2012) Assessing the use of function models and interaction models through concept sketching, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 45066, p. 633-646
(2012) Natural language processing applications in requirements engineering, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 45011, p. 541-549
(2012) Standardization of process sheet information to support automated translation of assembly instructions and product-process coupling
(2012) Can design evaluation tools predict/prevent change propagation, Proceedings of Tools and Methods of Competitive Engineering, Karlsruhe, Germany
(2012) Requirements in Engineering Design: What are we teaching?, Tools and methods for competitive engineering 1(38), p. 1319-1326, Karlsruhe, Germany
(2012) Evaluating and comparing functional and geometric complexity of products, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 45066, p. 551-558
(2012) Representation: structural complexity of assemblies to create neural network based assembly time estimation models, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 45028, p. 99-109
(2012) Reasoning: Source of variability in the Boothroyd and Dewhurst assembly time estimation method, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 45042, p. 611-618
(2012) Reasoning: Installation process step instructions as an automated assembly time estimation tool, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 45011, p. 223-230
(2012) Concept exploration through morphological charts: an experimental study
(2012) The effects of language and pruning on function structure interpretability
(2012) Validation of function pruning rules through similarity at three levels of abstraction
2011
(2011) Lazy Parts Indication Method: Application to Automotive Components
(2011) A method for evaluating manufacturing change in engineering design, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 54860, p. 1125-1134
(2011) Understanding the role of functions and interaction in the product design
(2011) A User Study to Evaluate the Function Model and Function Interaction Model for Concept Generation, International design engineering technical conferences and computers and information in engineering conference 54860, p. 273-284
(2011) Application of a lightweight engineering tool: lazy parts analysis and redesign of a remote controlled car, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 54853, p. 839-847
(2011) A protocol to formalise function verbs to support conservation-based model checking, Journal of Engineering Design 22(11-12), p. 765-788, Taylor & Francis
(2011) Review of collaborative engineering environments: Software, hardware, peopleware, DS 68-7: Proceedings of the 18th International Conference on Engineering Design (ICED 11), Impacting Society through Engineering Design, Vol. 7: Human Behaviour in Design, Lyngby/Copenhagen, Denmark, 15.-19.08. 2011
(2011) Function Representations in Morphological Charts: An Experimental Study on Variety, Interdisciplinary design: Proceedings of the 21st CIRP design conference
(2011) An empirical study of the expressiveness of the functional basis, AI EDAM 25(3), p. 273-287, Cambridge University Press
(2011) Exploring potentials for conservational reasoning using topologic rules of function structure graphs, DS 68-9: Proceedings of the 18th International Conference on Engineering Design (ICED 11), Impacting Society through Engineering Design, Vol. 9: Design Methods and Tools pt. 1, Lyngby/Copenhagen, Denmark, 15.-19.08. 2011, p. 377-388
(2011) Evaluating the use of functional representations for ideation in conceptual design, Clemson, South Carolina USA: Clemson University, url
2010
(2010) Toward a Formal Representation of the Functional Basis Verbs, Proc. of the Eighth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010)
(2010) A Representation of Artefacts and Interactions to Supplement Function, International Symposium on Tools and Methods of Competitive Engineering (TMCE), p. 12-16
(2010) Linguistic analysis of natural language engineering requirement statements, Tools and Methods for Competitive Engineering, p. 97-111, Ancona, Italy
(2010) Requirements and data content evaluation of industry in-house data management system, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 44113, p. 493-503
(2010) Requirement modeling systems for mechanical design: a systematic method for evaluating requirement management tools and languages, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 44113, p. 1247-1257
(2010) Metrics for Degree-of-Openness of Engineering Information, The American Society of Mechanical Engineers (ASME)
(2010) Functional similarity at varying levels of abstraction, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 44137, p. 431-441
(2010) Workshop for Identifying Assembly Time Savings: An OEM Empirical Study, 2010 International Conference on Manufacturing Automation, p. 178-185
(2010) Limitations to function structures: a case study in morphing airfoil design, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 44137, p. 405-417
(2010) Topological information content and expressiveness of function models in mechanical design
(2010) Evaluation of the functional basis using an information theoretic approach, AI EDAM 24(1), p. 87-105, Cambridge University Press
2009
(2009) Preliminary investigation of the use of design methods by capstone design students at a US university, science 12, p. 13
(2009) Linguistic analysis of natural language engineering requirements
(2009) Using DMMs to Relate Design for Assembly Rules to Human Interaction Guidelines, DSM 2009: Proceedings of the 11th International DSM Conference, Greenville, SC, USA, 12.-13.10. 2009, p. 233-241
(2009) Lightweight engineering of military vehicles through requirements analysis and function integration, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 49057, p. 873-883
(2009) Generating design structure matrices and domain mapping matrices using SysML, DSM 2009: Proceedings of the 11th International DSM Conference, Greenville, SC, USA, 12.-13.10. 2009, p. 131-140
(2009) A method for identifying requirements critical to mass reduction using DSMs and DMMs, DSM 2009: Proceedings of the 11th International DSM Conference, Greenville, SC, USA, 12.-13.10. 2009, p. 197-205
(2009) Investigation of the interpretability of three function structure representations: a user study, International design engineering technical conferences and computers and information in engineering conference 49057, p. 1055-1068
(2009) Hierarchical affordance modeling, DS 58-5: Proceedings of ICED 09, the 17th International Conference on Engineering Design, Vol. 5, Design Methods and Tools (pt. 1), Palo Alto, CA, USA, 24.-27.08. 2009
2008
(2008) Patent driven design: exploring the possibility of using patents to drive new design, Tools and Methods for Competitive Engineering Conference. Izmir, Turkey
(2008) Database support for reverse engineering, product teardown, and redesign as integrated into a mechanical engineering course, Comput. Educ. J 18(4), p. 9-21
(2008) Using rule based design in engineer to order industry: an SME case study, Computer-Aided Design and Applications 5(1-4), p. 178-193, Taylor & Francis
(2008) Product data management in undergraduate education, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 43277, p. 433-441
(2008) Towards rules for functional composition, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 43253, p. 319-328
(2008) Information management capabilities of MDO frameworks, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 43277, p. 635-645
(2008) Case study method for design research: A justification, International design engineering technical conferences and computers and information in engineering conference 43284, p. 495-503
(2008) Design method development: A case study and survey, Tools and Methods of Competitive Engineering
(2008) Empirical examination of the functional basis and design repository, Design Computing and Cognition’08: Proceedings of the Third International Conference on Design Computing and Cognition, p. 261-280
(2008) A Combined Multi-Material Euler/Lagrange Computational Analysis of Blast Loading Resulting from Detonation of Buried Landmines, Multidiscipline Modeling in Materials and Structures 4(2), p. 105-124, Emerald Group Publishing Limited
(2008) Engineering design complexity: an investigation of methods and measures, Research in Engineering Design 19, p. 161-179, Springer-Verlag
2007
(2007) A modeling scheme for capturing and analyzing conceptual design information: An application to the hair dryer example and comparison to existing literature, International Conference of Engineering Design, Paris, France
(2007) A hierarchical requirements modeling scheme to support engineering innovation, DS 42: Proceedings of ICED 2007, the 16th International Conference on Engineering Design, Paris, France, 28.-31.07. 2007, p. 839-840
(2007) A systematic method for modelling and analysing conceptual design information, DSM 2007: Proceedings of the 9th International DSM Conference, Munich, Germany, 16.-18.10. 2007, p. 297-310
(2007) Modeling and analysis of an ontology of engineering design activities using the design structure matrix, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 48043, p. 559-571
(2007) Decision retrieval and storage enabled through description logic, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 48035, p. 875-885
2006
(2006) A knowledge framework for integrating multiple perspectives in decision-centric design
(2006) A critical analysis of description logics for engineering information management, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 42578, p. 617-629
2005
(2005) Metrics for Degree-of-Openness of Engineering Information: Recognizing the Value of Standards-Based PLM—Part 2, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 47403, p. 751-760
(2005) Diagnosing Engineering Information Interoperability: Recognizing the Value of Standards-Based PLM—Part 1, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 47403, p. 789-797
(2005) SRL 264 Research–Part I. Methodology and Technology Supporting Multifunctional Multiscale Design, Georgia Institute of Technology
(2005) Incorporating uncertainty in diagnostic analysis of mechanical systems, J. Mech. Des. 127(2), p. 315-325
2004
(2004) Capturing design process information and rationale to support knowledge-based design and analysis integration
(2004) Towards reusable knowledge-based idealizations for rapid design and analysis, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, p. 2009
(2004) Capturing Design Process Information and Rationale to
(2004) A knowledge repository for behavioral models in engineering design, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 46970, p. 943-952
2003
(2003) A Scientific Formalism for Product Realization in a Global Manufacturing Enterprise
(2003) Systematic design method for information modeling in CAD/CAE, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 36991, p. 657-668
(2003) Master product model for the support of tighter design-analysis integration, National Institute of Standards and Technology, Gaithersburg, MD 20899
(2003) A survey of design-analysis integration issues, US Department of Commerce, Technology Administration, National Institute of~…
2001
(2001) Incorporating uncertainty into diagnostic analysis of mechanical systems