Publications

Journal Publications:

  1. F. Gao, S. Shoai Naini, J. Wagner, and R. Miller, “An Experimental and Numerical Study of Refrigerator Heat Leakage at the Gasket Region”, International Journal of Refrigeration, available on-line, http://dx.doi.org/doi:10.1016/j.ijrefrig.2016.09.002, vol. 73, pp. 99-110, January 2017.
  2. D. Parmar, J. Bertrand, S. Babu, K. Madathil, M. Zelaya, T. Wang, J. Wagner, K. Frady, and A. Gramopadhye, “A Comparative Evaluation of Viewing Metaphors on Psycho-physical Skills Education in an Interactive Virtual Environment”, Journal of Virtual Reality, ISSN 1359-4338, DOI 10.1007/s10055-016-0287-7, vol. 20, no. 3, pp. 141-157, September 2016.
  3. P. Freeman, J. Wagner, and K. Alexander, “Run-Off-Road and Recovery – State Estimation and Vehicle Control Strategies”, Journal of Vehicle System Dynamics, available on-line at DOI: 1080/00423114.2016.1200728, vol. 54, no. 9, pp. 1317-1343, August 2016.
  4. D. Parmar, J. Bertrand, S. Babu, K. Madathil, M. Zelaya, T. Wang, J. Wagner, K. Frady, and A. Gramopadhye, “A Comparative Evaluation of Viewing Metaphors on Psycho-physical Skills Education in an Interactive Virtual Environment”, Journal of Virtual Reality, ISSN 1359-4338, DOI 10.1007/s10055-016-0287-7, vol. 20, no. 3, pp. 141-157, September 2016.
  5. X. Tao, K. Zhou, J. Wagner, and H. Hoffman, “An Electric Motor Thermal Management System for Hybrid Vehicles – Modeling and Control”, International Journal of Vehicle Performance (IJVP), Special Issues on Recent Advancement in Vehicle Thermal Performance Management, vol. 2, issue 3, pp. 207-227, July 2016.
  6. X. Tao, and J. Wagner, “An Engine Thermal Management System Design for Military Ground Vehicle – Simultaneous Fan, Pump and Valve Control”, SAE International Journal of Passenger Cars – Electronic and Electrical Systems, vol. 9, no. 1, pp. 243-254, May 2016.
  7. J. Rodriguez, P. Freeman, B. Bridges, J. Wagner, K. Alexander, and P. Pidgeon, “Automotive Steering System Preferences Evaluated Using a Driving Simulator”, International Journal of Automotive Technology, vol. 17, no. 1, pp. 71-89, February 2016.
  8. P. Freeman, D. Neyens, J. Wagner, F. Switzer, K. Alexander, and P. Pidgeon, “A Video Based Run-Off-Road Training Program with Practice and Evaluation in a Simulator”, Journal of Accident Analysis & Prevention, vol. 82, pp. 1-9, September 2015.
  9. X. Tao and J. Wagner, “A Thermal Management System for the Battery Pack of a Hybrid Electric Vehicle: Modeling and Control”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 230, no. 2, pp. 190-201, January 2016.
  10. T. Wang, A. Jagarwal, J. Wagner, and G. Fadel, “Optimization of an Automotive Radiator Fan Array Operation to Reduce Power Consumption”, IEEE/ASME Transactions on Mechatronics, vol. 20, no. 5, pp. 2359-2369, October 2015.
  11. T. Wang, and J. Wagner, “Advanced Automotive Thermal Management – Nonlinear Radiator Fan Matrix Control”, Journal of Control Engineering Practice, vol. 41, pp. 113-123, August 2015.
  12. G. Ali, J. Wagner, D. Moline, and T. Schweisinger, “Energy Harvesting from Atmospheric Variations – Theory and Test”, Elsevier Journal of Renewable Energy, vol. 74, pp. 528-535, February 2015.
  13. P. Freeman, J. Rodriguez, J. Wagner, K. Alexander, and P. Pidgeon, “Validation of a Fixed-base Automotive Simulator for Run-off Road Safety and Recovery Training”, Proc. IMechE, Part D: Journal of Automobile Engineering, vol. 229, no. 5 , pp. 574-589, April 2015.
  14. P. Freeman, M. Jensen, J. Wagner, and K. Alexander, “A Comparison of Multiple Control Strategies for Vehicle Run-Off-Road and Return”, IEEE Transactions on Vehicular Technologies, vol. 64, issue 3, pp. 901-911, March 2015.
  15. D. Moline and J. Wagner, “Operating Principles, Common Questions, and Performance Data for an Atmospheric Driven Atmos Clock”, The Watch & Clock Bulletin (National Association of Watch & Clock Collectors), vol. 57/1, no. 413, pp. 66-79, January – February 2015.
  16. P. Freeman, J. Black, E. Iyasare, J. Wagner, D. Dawson, and F. Switzer, “Evaluation of Driver Steering Preferences Using an Automotive Simulator”, International Journal of Vehicle Design, vol. 66, no. 2, pp. 124-142, September 2014.
  17. X. Zhang, A. Ivanco, X. Tao, J. Wagner, and Z. Filipi, “Optimization of the Series-HEV Control with Consideration of the Impact of Battery Cooling Auxiliary Losses”, SAE International Journal of Alternative Power, vol. 3, no. 2, pp. 234-242, July 2014.
  18. R. Schkoda, R. Lund, and J. Wagner, “Clustering of Cyclostationary Signals with Applications to Climate Station Sitings, Eliminations, and Merges, IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 7, no. 5, pp. 1754-1762, May 2014.
  19. R. Schkoda, R. Lund, N. Su, and J. Wagner, “A Comparison of Multivariate Signal Discrimination Techniques”, Journal of Statistical Computing and Simulation, vol. 85, no. 3, pp. 494-506, 2015.
  20. Q. Yao, J. Wagner, K. Alexander, and P. Pidgeon, “A Virtual Driving Education Simulation System – Hardware and Software with Pilot Study”, SAE International Journal of Passenger Cars – Electronic and Electical Systems,  vol. 6, no. 2, pp. 498-506, August 2013.
  21. F. He, D. Ewing, D., J. Finn, J. Wagner, and L. Ma., “Thermal Management of Vehicular Payloads Using Nanofluid Augmented Coolant Rail- Modeling and Analysis,” SAE International Journal of Alternative Powertrains, vol. 2, no. 1, pp. 174-203, August 2013.
  22. R. Schkoda, T. A. Schweisinger, and J. R. Wagner, “An Improved Undergraduate Mechanical Engineering Laboratory Structure and Curriculum: Design and Assessment”, International Journal of Mechanical Engineering Education, vol. 40, no. 3, pp. 182-196, July 2012, appeared on journal website July 2013.
  23. Q. Yao, J. Wagner, K. Alexander, and P. Pidgeon, “Assessment of an Automotive Driving Simulator to Educate Novice Drivers”, The Chronicle for Driver Education Professionals, electronic publication of the American Driver and Traffic Safety Education Association (ADTSEA), vol. 60, pp. 18-32, May 2013.
  24. L. Clark, J. Wagner, K. Alexander, P. Pidgeon, and K. Rogich, “Focused Novice Driver Program – Assessment Results and Discussion”, The Chronicle for Driver Education Professionals, electronic publication of the American Driver and Traffic Safety Education Association (ADTSEA), vol. 60, pp. 3-12, February 2013.
  25. R. Patel, J. Wagner, R. Collins, A. Gramopadhye, T. Schweisinger, and M. Hanna, “A Multi-Disciplinary Mechatronics Course with Assessment – Integrating Theory and Application through Laboratory Activities”, International Journal of Engineering Education, vol. 28, no. 5, pp. 1141-1149, October 2012.
  26. J. Finn, J. R. Wagner, E. J. Walters, and K. E. Alexander, “An Integrated Child Safety Seat Cooling System – Model and Test”, IEEE Transactions on Vehicular Technology, vol. 61, no. 5, pp. 1999-2007, June 2012.
  27. D. Moline, J. Wagner, and E. Volk, “Model of a Mechanical Clock Escapement”, American Journal of Physics, vol. 80, issue 7, pp. 599-606, July 2012.
  28. M. Salah, M. L. McIntyre, D. M. Dawson, J. R. Wagner, and E. Tatlicioglu, “Charge Feedback-Based Robust Position Tracking Control for Piezoelectric Actuators”, Institution of Engineering and Technology (IET) – Journal of Control Theory & Applications, vol. 6, no. 5, pp. 1-14, May 2012.
  29. H. Bassily, M. Daqaq, and J. Wagner, “Application of Pseudo-Poincare Maps to Assess Gas Turbine System Health”, ASME Journal of Gas Turbines and Power, vol. 134, No. 5, pp. 051601, 8 pages, May 2012.
  30. E. Iyasere, M. Salah, D. Dawson, J. Wagner, and E. Tatlicioglu, “Optimum Seeking-based Nonlinear Controller to Maximize Energy Capture in a Variable Speed Wind Turbine,” Institution of Engineering and Technology (IET) – Journal of Control Theory and Applications, vol. 6, no. 4, pp. 526-532, April 2012.
  31. E. Iyasere, M. Salah, D. Dawson, J. Wagner, and E. Tatlicioglu, “Robust Nonlinear Control Strategy to Maximize Energy Capture in a Variable Speed Wind Turbine with an Internal Induction Generator,” Journal of Control Theory and Applications, vol. 10, no. 2, pp. 184-194, February 2012.
  32. M. Jensen, M. Tolbert, J. Wagner, F. Switzer, and J. Finn, “A Customizable Automotive Steering System Haptic Feedback Control Strategy for Obstacle Avoidance Notification”, IEEE Transactions on Vehicular Technology, vol. 60, no. 9, pp. 4208-4216, November 2011.
  33. M. Jensen, J. Wagner, K. Alexander, P. Pidgeon, K. Rogich, and R. Fedrizzi, “Automotive Participant Tailgating Safety Training Device – Design and Test”, International Journal of Vehicle Safety, vol. 5, no. 4, pp. 319-332, October 2011.
  34. J. Black and J. Wagner, “Vehicle Road Runoff and Return – Effect of Limited Steering Intervention”, SAE International Journal of Passenger Cars – Mechanical Systems, vol. 4, no. 1, pp. 523-535, April 2011.
  35. D. Norfleet, J. Wagner, K. Alexander, and P. Pidgeon, “Automotive Driving Simulators: Research, Education, and Entertainment”,  SAE International Journal of Passenger Cars – Electronic and Electrical Systems, vol. 2, no. 1, pp. 186-193, April 2011.
  36. M. Jensen, J. Wagner, F. Switzer, K. Alexander, P. Pidgeon, and K. Rogich, “Development of a Second-stage Novice Driver Training Program”, The Chronicle for Driver Education Professionals, electronic publication of the American Driver and Traffic Safety Education Association (ADTSEA), vol. 58, pp. 4-13, Summer 2011.
  37. C. Hapstack and J. Wagner, “Building a Verge and Foliot Clock – Creating a Historical Time Piece and Learning about Horology’s Scientific Foundation”, Watch & Clock Bulletin (a peer reviewed journal sponsored by the National Association of Watch & Clock Collectors), no. 394, pp. 510-517, October 2011.
  38. M. Jensen, J. Wagner, and K. Alexander, “Analysis of In-Vehicle Driver Behaviour Data for Improved Safety”, International Journal of Vehicle Safety, vol. 5, no. 3, pp. 197-212, July 2011.
  39. T. Shirley, J. Wagner, R. Collins, A. Gramopadhye, T. Schweisinger, and M. Hanna, “A Mechatronics and Material Handling Systems Laboratory – Experiments and Case Studies”, International Journal of Electrical Engineering Education, vol. 48, no. 1, pp. 92-103, January 2011.
  40. M. Salah, M. L. McIntyre, D. M. Dawson, J. R. Wagner, and E. Tatlicioglu, “Sensing of the Time-Varying Angular Rate for MEMS Z-Axis Gyroscopes”, Journal of Mechatronics, vol. 20, no. 6, pp. 720-727, June 2010.
  41. J. Finn, J. Wagner, and H. Bassily, “Monitoring Strategies for a Combined Cycle Electric Power Generator”, Journal of Applied Energy, vol. 87, pp. 2621-2627, August 2010.
  42. M. Salah, T. Mitchell, J. Wagner, and D. Dawson, “A Smart Multiple Loop Automotive Cooling System – Model, Control, and Experimental Study”, IEEE/ASME Transactions on Mechatronics, vol. 15, no. 1, pp. 117-124, February 2010.
  43. H. Bassily, R. Lund, and J. Wagner, “Fault Detection in Multivariate Signals with Application to Gas Turbines”, IEEE Transactions on Signal Processing, vol. 57, no. 3, pp. 835-842, March 2009.
  44. T. Mitchell, M. Salah, J. Wagner, and D. Dawson, “Automotive Thermostat Valve Configurations – Enhanced Warm Up Performance”, ASME Journal of Dynamic Systems, Measurement, and Control, vol. 131, no. 4, pp. 044501-1 to 044501-7, July 2009.
  45. M. Salah, P. Frick, J. Wagner, and D. Dawson, “Hydraulic Actuated Automotive Cooling Systems – Nonlinear Control and Test”, Journal of Control Engineering Practice, vol. 17, no. 5, pp. 609-621, May 2009.
  46. A. Baviskar, J. Wagner, D. Dawson, D. Braganza, and P. Setlur, “An Adjustable Steer-by-Wire Haptic Interface Tracking Controller for Ground Vehicles”, IEEE Transactions on Vehicular Technology, vol. 58, no. 2, pp. 546-554, February 2009.
  47. R. Sekhon, H. Bassily, and J. Wagner, “A Comparison of Two Trending Strategies for Gas Turbine System Performance Prediction”, ASME Journal of Engineering for Gas Turbines and Power, vol. 130, no. 4, pp. 041601 1-10, July 2008.
  48. C. Simoson, and J. Wagner, “Effects of Cooled EGR on a Small Displacement Diesel Engine: A Reduced-Order Dynamic Model and Experimental Study”, ASME Journal of Energy Resources Technology, vol. 130, no. 1, pages 011102 1-11, March 2008.
  49. M. Salah, T. Mitchell, J. Wagner, and D. Dawson, “Nonlinear Control Strategy for Advanced Vehicle Thermal Management Systems”, IEEE Transactions on Vehicular Technology, vol. 57, no. 1, pp. 127-137, January 2008.
  50. H. Bassily, R. Sekhon, D. Butts, and J. Wagner, “A Mechatronics Educational Laboratory – Programmable Logic Controllers and Material Handling Experiments”, Journal of Mechatronics, vol. 17, no. 9, pp. 480-488, November 2007.
  51. S. Ancha, A. Baviskar, J. Wagner, and D. Dawson, “Ground Vehicle Steering Systems – Modeling, Control and Analysis of Hydraulic, Electric, and Steer-by-Wire Configurations”, International Journal of Vehicle Design (IJVD), vol. 44, nos. 1/2, pp. 188-208, 2007.
  52. D. Cimba, J. Wagner, and A. Baviskar, “Investigation of Active Torsion Bar Actuator Configurations to Reduce Vehicle Body Roll”, Vehicle System Dynamics – International Journal of Vehicle Mechanics and Mobility, vol. 44, no. 9, pp. 719-736, 2006.
  53. P. Setlur, J. Wagner, D. Dawson, and D. Braganza, “A Trajectory Tracking Steer-by-Wire Control System for Ground Vehicles”, IEEE Transactions on Vehicular Technology, vol. 55, no. 1, pp. 76-85, 2006.
  54. P. Setlur, J. Wagner, D. Dawson, and E. Marotta, “An Advanced Engine Thermal Management System: Nonlinear Control and Test”, IEEE/ASME Transactions on Mechatronics, vol. 10, no. 2, pp. 210-220, 2005.
  55. V. Blouin, G. Fadel, I. Haque, J. Wagner, and H. Samuels, “Continuously Variable Transmission Design for Optimum Vehicle Performance by Analytical Target Cascading”, International Journal of Heavy Vehicle Design – Special Automotive Research Center Edition, vol. 11, nos. 3/4, pp. 327-348, 2004.
  56. R. Conatser, S. Ganta, J. Wagner, and I. Walker, “Diagnosis of Automotive Electronic Throttle Control Systems”, Journal of Control Engineering Practice, vol. 12, no. 1, pp. 23-30, 2004.
  57. V. Mills and J. Wagner, “Behavioural Modeling and Analysis of Hybrid Vehicle Steering Systems”, Proceedings of the Institution of Mechanical Engineers, Part D, Journal of Automobile Engineering, vol. 217, no. 5, pp. 349-361, 2003.
  58. M. Ghone, M. Schubert, and J. Wagner, “Development of a Mechatronics Laboratory –
    Eliminating Barriers to Manufacturing Instrumentation and Control”, IEEE Journal on Industrial Electronics, vol. 50, no. 2, pp. 394-397, 2003.
  59. J. Wagner, D. Dawson, and Z. Liu, “Nonlinear Air-to-Fuel Ratio and Engine Speed Control for Hybrid Vehicles”, IEEE Transactions on Vehicular Technology, vol. 52, no. 1, pp. 184-195, 2003.
  60. N. Jalili, J. Wagner, and M. Dadrarnia, “A Piezoelectric Driven Ratchet Actuator Mechanism with Application to Automotive Engine Valves”, International Journal of Mechatronics, vol. 13, nos. 8-9, pp. 933-956, 2003.
  61. P. Setlur, J. Wagner, D. Dawson, and B. Samuels, “Nonlinear Control of a Continuously Variable Transmission (CVT)”, IEEE Transactions on Control System Technology, vol. 11, no. 1, pp. 101-108, 2003.
  62. J. Wagner, I. Paradis, E. Marotta, and D. Dawson, “Enhanced Automotive Engine Cooling Systems – A Mechatronics Approach”, International Journal of Vehicle Design, vol. 28, nos. 1/2/3, pp. 214-240, 2002.
  63. Z. Liu and J. Wagner, “Nonlinear Model Reduction for Dynamic and Automotive System Descriptions”, ASME Journal of Dynamic Systems, Measurement, and Control, vol. 124, no. 4, pp. 637-647, 2002.
  64. X. Liu and J. Wagner, “Design of a Vibration Isolation Actuator for Automotive Seating Systems – Part I: Modeling and Passive Isolator Performance”, International Journal of Vehicle Design, vol. 29, no. 4, pp. 335-356, 2002.
  65. X. Liu and J. Wagner, “Design of a Vibration Isolation Actuator for Automotive Seating Systems – Part II: Controller Design and Actuator Performance”, International Journal of Vehicle Design, vol. 29, no. 4, p 357-375, 2002.
  66. I. Paradis, E. E. Marotta, and J. R. Wagner, “Thermal Periodic Contact of Exhaust Valves in Spark Ignition Air Cooled Engines”, AIAA Journal of Thermophysics and Heat Transfer, vol. 16, no. 3, pp. 356-365, 2002.
  67. V. Mills, B. Samuels, and J. Wagner, “Modeling and Analysis of Automotive Antilock Brake Systems Subject to Vehicle Payload Shifting”, Vehicle Systems Dynamics – International Journal of Vehicle Mechanics & Mobility, vol. 37, no. 4, 283-310, 2002.
  68. J. Wagner and X. Liu, “An Active Vibration Isolation System for Vehicle Seats”, SAE 2000 Transactions – Journal of Passenger Cars and Mechanical Systems, vol. 109, section 6, pp. 1076-1087, 2001.
  69. J. Wagner, R. Brunts, K. Kaster, D. Eagan and D. Anthony, “A Vision for Automotive Electronics Hardware-in-the-Loop Testing”, International Journal of Vehicle Design, vol. 22, nos. 1/2, pp. 14-28, 1999.
  70. J. Wagner, J. Keane, R. Koseluk, and W. Whitlock, “Engine Knock Detection Systems: Products, Tools, and Emerging Research”, SAE 1998 Transactions – Journal of Engines, vol. 107, section 3, pp. 636-643, 1999.
  71. J. Wagner and J. Keane, “A Strategy to Verify Chassis Controller Software – Dynamics, Hardware, and Automation”, IEEE Transactions on Systems, Man, and Cybernetics, Part A: Systems and Humans, vol. 27, no. 4, pp. 480-493, 1997.
  72. J. Wagner, “Optimization of a Tire Traction Model for Antilock Brake System Simulations”, Journal of Dynamic Systems, Measurement and Control, vol. 117, no. 2, pp. 199-204, 1995.
  73. K. Butler and J. Wagner, “A Strategy to Demonstrate the Compliance of Automotive Controller Software to Systems Requirements Using Simulation Technology”, SAE 1994 Transactions – Journal of Engines, vol. 103, section 3, pp. 776-786, published 1995.
  74. J. Wagner, “Failure Mode Testing Tool Set for Automotive Electronic Controllers”, IEEE Transactions on Vehicular Technology, vol. 43, no. 1, pp. 156-163, 1994.
  75. J. Wagner and R. Shoureshi, “Nonlinear Modeling and Observer Design for Thermofluid System Diagnostics”, International Journal of Modeling and Simulation, vol. 13, no. 1, pp. 39-45, 1993.
  76. J. Wagner and R. Shoureshi, “A Failure Isolation Strategy for Thermofluid Systems Diagnostics”, Journal of Engineering for Industry, vol. 115, no. 4, pp. 459-465, 1993.
  77. J. Wagner and J. Furry, “A Real-Time Simulation Environment for the Verification of Automotive Electronic Controller Software”, International Journal of Vehicle Design, vol. 13, no. 4, pp. 365-377, 1992.
  78. J. Wagner and R. Shoureshi, “Failure Detection Diagnostics for Thermofluid Systems”, Journal of Dynamic Systems, Measurement and Control, vol. 114, no. 4, pp. 699-706, 1992.
  79. J. Wagner and R. Shoureshi, “A Robust Failure Diagnostic System for Thermofluid Processes”, Automatica, vol. 28, no. 2, pp. 375-381, 1992.

Conference Proceedings (Reviewed):

  1. X. Tao, and J. Wagner, “Optimization of a Military Ground Vehicle Engine Cooling System Heat Exchanger – Modeling and Size Scaling”, proceedings of the 2017 SAE World Congress, SAE paper no. 2017-01-0259, Detroit, MI, April 2017.
  2. J. Finn, and J. Wagner, “Control of a Thermoelectric Cooling System for Vehicle Payloads – Theory and Test”, proceedings of the 2017 SAE World Congress, SAE paper no. 2017-01-0126, Detroit, MI, April 2017.
  3. S. Shoai Naini, J. Huang, R. Miller, D. Rizzo, S. Schurin, K. Seebeck, and J. Wagner, “A Thermal Bus for Vehicle Cooling Applications – Design and Analysis”, proceedings of the 2017 SAE World Congress, SAE paper no. 2017-01-0266, Detroit, MI, April 2017.
  4. P. Giguere and J. Wagner, “A Case Study of Evaluating and Augmenting Test Bench Capability for IEC Dynamic Load Cases”, proceedings of the 3rd Conference for Wind Power Drives, Center for Wind Power Drives, RWTH Aachen University, Aachen, Germany, March 2017.
  5. S. Fu, H. Saeidi, E. Sand, B. Sadrfaidpour, J. Rodriguez, Y. Wang, and J. Wagner, “A Haptic Interface with Adjustable Feedback for Unmanned Aerial Vehicles (UAVs) – Model, Control, and Test”, proceedings of the American Control Conference, WeA14.1, Boston, MA, June 2016.
  6. B. Rahman, and J. Wagner, “Energy Efficient Refrigeration – Improvement of Compact Thermoelectric Units through Modeling, Testing, and Control”, proceedings of the American Control Conference, WeB13.2, Boston, MA, June 2016.
  7. H. Saeidi, F. McLane, B. Sadrfaridpour, E. Sand, S. Fu, J. Rodriguez, J. Wagner, and Y. Wang, “Trust-Based Mixed-Initiative Bilateral Teleoperation of Mobile Robotic Systems”, proceedings of the American Control Conference, FrA23.5, Boston, MA, June 2016.
  8. X. Tao, and J. Wagner, “An Engine Thermal Management System Design for Military Ground Vehicle – Simultaneous Fan, Pump and Valve Control”, proceedings of the 2016 SAE World Congress, SAE paper no. 2016-01-0310, Detroit, MI, April 2016.
  9. J. Rodriguez, J. Wagner, K. Alexander, P. Pidgeon, and K. Rogich, “A Dynamic Driving Course for Military Personal – Curriculum and Assessment Results”, proceedings of the 2015 SAE World Congress, SAE paper no. 2015-01-0130, Detroit, MI, April 2015.
  10. T. Zellmer, J. Rodriguez, J. Wagner, K. Alexander, and P. Pidgeon, “Development and Evaluation of a Portable Driving Performance and Analysis System for Education Purposes”, proceedings of the 2015 SAE World Congress, SAE paper no. 2015-01-0259, Detroit, MI, April 2015.
  11. T. Wang, and J. Wagner, “A Smart Engine Cooling System – Experimental Study of Integrated Actuator Transient Behavior”, proceedings of the 2015 SAE World Congress, SAE paper no. 2015-01-1604, Detroit, MI, April 2015.
  12. S. Fu, P. Freeman, and J. Wagner, “Driver Models for Virtual Testing of Automotive Run-Off-Road and Recovery Control Systems and Educatio Strategies”, proceedings of the 2015 SAE World Congress, SAE paper no. 2015-01-0256, Detroit, MI, April 2015.
  13. X. Tao, J. Wagner, H. Hoffman, and Z. Filipi, “A Hybrid Electric Vehicle Thermal Management System – Nonlinear Controller Design”, proceedings of the 2015 SAE World Congress, SAE paper no. 2015-01-1710, Detroit, MI, April 2015.
  14. J. Bertrand, D. Brickler, S. Babu, K. Madathil, M. Zelaya, T. Wang, J. Wagner, A. Gramopadhye, and J. Luo, “The Role of Dimensional Symmetry on Bimanual Psychomotor Skills Eduation in Immersive Virtual Environments”, proceedings of the 22nd IEEE Virtual Reality Conference, Arles, France, March 2015.
  15. X. Tao, and J. Wagner, “Cooling Air Temperature Control for Hybrid Electric Vehicle Battery Thermal Management”, proceedings of the ASME Dynamic Systems and Control Conference, DSCC2014-6001, San Antonio, TX, October 2014.
  16. K. Austin, X. (James) She, and J. Wagner, “Thermoeletric Generation Using Diesel Engine Exhaust Waste Heat”, proceedings of the ASME Dynamic Systems and Control Conference, DSCC2014-6065, San Antonio, TX, October 2014.
  17. T. Zellmer, P. Freeman, J. Wagner, K. Alexander, and P. Pidgeon, “A Mobile Tailgating Detection System for Law Enforcement Surveillance”, proceedings of the ASME Dynamic Systems and Control Conference, DSCC2014-5884, San Antonio, TX, October 2014.
  18. S. Patel, P. Freeman, and J. Wagner, “An Electrical Microgrid – Integration of Solar Panels, Compressed Air Storage, and a Micr-Cap Gas Turbine”, proceedings of the ASME Dynamic Systems and Control Conference, DSCC2014-6058, San Antonio, TX, October 2014.
  19. X. Zhang, A. Ivanco, X. Tao, J. Wagner, and Z. Filipi, “Optimization of the Series-HEV Control with Consideration of the Impact of Battery Cooling Auxiliary Losses”, proceedings of the 2014 SAE World Congress, SAE paper no. 2014-01-1904, Detroit, MI, April 2014.
  20. K. Austin and J. Wagner, “An Electromagnet Excited Mass–Pendulum System Laboratory Experiment – Theory And Test”, proceedings of the 2013 European Control Conference, WeA9.1, Zurich, Switzerland, July 2013.
  21. S. Patel, D. Moline, and J. Wagner, “Thermodynamic Analysis of an Atmospheric Driven Clock with Mechanical Escapement Controller – Theory and Test”, proceedings of the 2013 European Control Conference, WeA9.5, Zurich, Switzerland, July 2013.
  22. M. Jensen, P. Freeman, J. Wagner, and K. Alexander, “Controller Design and Evaluation for Vehicle Run-Off-the-Road and Recovery”, proceedings of the 2013 European Control Conference, WeB14.2, Zurich, Switzerland, July 2013.
  23. T. Wang, J. Wagner, K. Chalil Madathil, M. Zelaya, J. Bertrand, K. Frady, A. Gramophadye, and S. Babu,, “Interactive Three Dimensional Visualization Based Engineering Technology Education – Modeling and Animation”, proceedings of the ASEE National Conference, T239B.4, Atlanta, GA, June 2013.
  24. M. Zelaya, K. Chalil Madathil, J. Bertrand, T. Wang, A. Gramopadhye, J. Wagner, and S. Babu, “An Investigation of the Information-Seeking Behaviors of Two-Year College Students Enrolled in Technology Programs”, proceedings of the ASEE National Conference, W470.2, Atlanta, GA, June 2013.
  25. B. Oliver, J. Wagner, R. Singh, and E. Makram, “Renewable Energy Education at Clemson University – A Certification Program with Solar, Wind, and Electrical Grid Classes”, proceedings of the ASEE National Conference, M526.1, Atlanta, GA, June 2013.
  26. P. Freeman, S. Samant, J. Wagner, K. Alexander, and P. Pidgeon, “Evaluation of an Automotive Simulator Based Driver Training Program for Run-Off-the-Road”, proceedings of the 2013 SAE World Congress, SAE paper no. 2013-01-1260, Detroit, MI, April 2013.
  27. F. He, D. Ewing, J. Finn, J. Wagner, and L. Ma, “Thermal Management of Vehicular Payloads Using Nanofluid Augmented Coolant Rail- Modeling and Analysis”, proceedings of the 2013 SAE World Congress, SAE paper no. 2013-01-1641, Detroit, MI, April 2013.
  28. L. Clark, J. Wagner, K. Alexander, and P. Pidgeon, “A Smart Jersey Highway Barrier with Portal for Small Animal Passage and Driver Alert”, proceedings of the 2013 SAE World Congress, SAE paper no. 2013-01-0620, Detroit, MI, April 2013.
  29. Q. Yao, J. Wagner, K. Alexander, and P. Pidgeon, “A Virtual Driving Education Simulation System – Hardware and Software with Pilot Study”, proceedings of the 2013 SAE World Congress, SAE paper no. 2013-01-1407, Detroit, MI, April 2013.
  30. L. Clark, J. Wagner, M. Jensen, K. Alexander, P. Pidgeon, K. Rogich, “Assessment of a Safe Driving Program for Novice Operators”, proceedings of the 2013 SAE World Congress, SAE paper no. 2013-01-0441, Detroit, MI, April 2013.
  31. M. Sheen, D. Tiernan, P. Jansen, C. Beck, C. Brunner, T. Griel, D. Gottschall, R. Lemert-Smith, M. Murphy, T. Schweisinger, J. Wagner, T. Burg, and J. Gibert, “Increasing 3D Printing Accessibility Through a Low-Cost, Automated Workstation”, poster presented at the annual meeting of the American Society of Engineering Education at Tennessee Technological University, Cookeville, TN, March 2013.
  32. U. Mandhata, M. Jensen, J. Wagner, F. Switzer, D. Dawson, and J. Summers, “Evaluation of a Customizable Haptic Feedback System for Ground Vehicle Steer-by-Wire Interfaces”, proceedings of the 2012 American Controls Conference, ThA11.6, Montreal, Canada, June 2012.
  33. G. Wiggins, J. Wagner, D. Erich, D. Dawson, and G. Youell, “Evaluation of Computer Controlled Electric Motors in Air, Argon, and Helium Gas Operating Environments”, American Glovebox Society (AGS) Glovebox & Isolator Annual Conference, San Francisco, July 2011.
  34. J. Finn, D. Ewing, L. Ma, and J. Wagner, “Nanofluid Augmented Coolant Rail Thermoelectric Cooling of Electronic Systems – Modeling and Analysis”, proceedings of the 2011 American Controls Conference, ThC05.3, San Francisco, CA, June 2011.
  35. J. Black, E. Iyasere, and J. Wagner, “Creation of a Driver Preference Objective Metric to Evaluate Ground Vehicle Steering Systems”, proceedings of the 2011 American Controls Conference, ThA04.6, San Francisco, CA, June 2011.
  36. J. Black and J. Wagner, “Vehicle Road Runoff and Return – Effect of Limited Steering Intervention”, proceedings of the 2011 SAE World Congress, SAE paper no. 2011-01-0583, Detroit, MI, April 2011.
  37. D. Norfleet, M. Jensen, J. Wagner, and K. Alexander, “Automotive Simulator based Novice Driver Training with Assessment”, proceedings of the 2011 SAE World Congress, SAE paper no. 2011-01-1011, Detroit, MI, April 2011.
  38. J. Chastain, J. Wagner, and J. Eberth, “Advanced Engine Cooling – Components, Testing and Observations”, proceedings of the 6th IFAC Symposium on Advances in Automotive Control, MC3.3, Munich, Germany, July 2010.
  39. M. Reiter and J. Wagner, “Automated Automotive Tire Inflation System – Effect of Tire Pressure on Vehicle Handling”, proceedings of the 6th IFAC Symposium on Advances in Automotive Control, P-33, Munich, Germany, July 2010.
  40. U. Mandhata, J. Wagner, F. Switzer, D. Dawson, and J. Summers, “A Customizable Steer-By-Wire Interface for Ground Vehicles”, proceedings of the 6th IFAC Symposium on Advances in Automotive Control, WA2.2, Munich, Germany, July 2010.
  41. J. Finn, D. Ewing, L. Ma, and J. Wagner, “Thermal Protection of Vehicle Payloads Using Phase Change Materials and Liquid Cooling”, proceedings of the 2010 American Controls Conference, WeB12.2, Baltimore, MD, June 2010.
  42. J. Wagner, C. Huey, K. Knaub, E. Volk, and A. Jagarwal, “Modeling and Analysis of a Weight Driven Mechanical Tower Clock”, proceedings of the 2010 American Controls Conference, WeA18.3, Baltimore, MD, June 2010.
  43. E. Iyasere, D. Dawson, J. Wagner, M. Salah, and E. Tatlicioglu, “Nonlinear Robust Control to Maximize Energy Capture in a Variable Speed Wind Turbine Using an Induction Generator”, proceedings of the 2009 IEEE International Conference on Systems, Man, and Cybernetics, San Antonio, TX, October 2009.
  44. T. Turner, R. Schkoda, J. Wagner, and R. Leitner, “Wind Shear Modeling for Wind Turbine Siting Studies”, proceedings of the 2009 ASME Dynamics Systems and Control Conference (DSCC), vol. 1, 339, Hollywood, CA October 2009.
  45. T. Shirley, J. Wagner, R. Collins, and A. Gramopadhye, “A Mechatronics (and Material Handling Systems) Course – Classroom Topics, Laboratory Experiments, and Project”, proceedings of the ASEE Annual Conference, AC 2009-809, Austin, TX, June 2009.
  46. J. Wagner, and K. Knaub, “Time Keeping Experiments for a Mechanical Engineering Education Laboratory Sequence”, proceedings of the ASEE Annual Conference, AC 2009-439, Austin, TX, June 2009.
  47. D. Norfleet, J. Wagner, K. Alexander, and P. Pidgeon, “Automotive Driving Simulators: Research, Education, and Entertainment”, proceedings of the 2009 SAE World Congress SAE paper no. 2009-01-0533, Detroit, MI, April 2009.
  48. P. Frick, J. Wagner, and P. Mehta, “A Hydraulic Actuated Automotive Thermal Management System – Theory and Experiment”, proceedings of the 2008 ASME Dynamics Systems and Control Conference (DSCC), DSCC2008-2117, Ann Arbor, MI October 2008.
  49. J. Wagner, C. Huey, and K. Knaub, “Clock Mechanism Fundamentals for Education – Modeling and Analysis”, proceedings of the 2008 ASME Dynamics Systems and Control Conference (DSCC), DSCC2008-2100, Ann Arbor, MI, October 2008.
  50. J. Black, J. Wagner, K. Alexander, P. Pidgeon, “Vehicle Road Runoff – Active Steering Control for Shoulder Induced Accidents”, proceedings of the 2008 American Control Conference, ThC09.5, Seattle, WA, June 2008.
  51. E. Isayere, M. Salah, D. Dawson, and J. Wagner, “Nonlinear Robust Control to Maximize Energy Capture in a Variable Speed Wind Turbine”, proceedings of the 2008 American Control Conference, WeC17.4, Seattle, WA, June 2008.
  52. M. Jensen, J. Wagner, K. Alexander, and P. Pidgeon, “A Customizable Human/Vehicle Interface for Enhanced Operator Performance”, proceedings of the ASME IMECE, Dynamic Systems and Controls Division, IMECE2007-41430, Seattle, WA, November 2007.
  53. H. Bassily, and J. Wagner, “Application of Nonlinear Time Series Principles to Assess Power Generation Gas Turbine Health”, proceedings of the ASME IMECE, Dynamic Systems and Controls Division, IMECE2007-41391, Seattle, WA, November 2007.
  54. R. Lusso, M. Jensen, E. Walters, J. Wagner, and K. Alexander, “Automobile Safety Child Seat Entrapment and Mechatronic Warning System”, proceedings of the Fifth IFAC (International Federation of Automatic Control) Symposium on Advances in Automotive Control (AAC 2007), Monterey Coast, CA, August 2007.
  55. E. Iyasere, J. Black, M. Kinstle, B. Post, J. Wagner, and D. Dawson, “A Real Time Re-Configurable Steering Simulator for System Design Studies”, proceedings of the 2007 American Controls Conference, ThA06.2, New York, NY, July 2007.
  56. M. Salah, M. McIntyre, D. Dawson, and J. Wagner, “Robust Tracking Control for a Piezoelectric Actuator”, proceedings of the 2007 American Controls Conference, New York, NY, July 2007.
  57. M. Rhoads and J. Wagner, “A User Configurable Powertrain Controller with Open Software Management”, proceedings of the 2007 SAE World Congress, SAE paper no. 2007-01-1601, Detroit, MI, April 2007.
  58. M. Salah, M. McIntyre, D. Dawson, and J. Wagner, “Time-Varying Angular Rate Sensing for a MEMS Z-Axis Gyroscope”, proceedings of the 45th IEEE Conference on Decision and Control (CDC), WeIP1.7, San Diego, CA, December 2006.
  59. R. Sekhon, H. Bassily, and J. Wagner, “Real Time Prognostic Strategies with Application to Stationary Gas Turbines”, proceedings of the ASME IMECE, Dynamic Systems and Controls Division, IMECE2006-14068, Chicago, IL, November 2006.
  60. P. Frick, H. Bassily, H. Watson, and J. Wagner, “A Hydraulic Fan Driven Heat Exchanger for Automotive Cooling Systems”, proceedings of the ASME IMECE, Dynamic Systems and Controls Division, IMECE2006-13464, Chicago, IL, November 2006.
  61. D. Noble, J. Wagner, and E. Marotta, “A Mechatronic Thermal Management System for Mobile Fuel Cells”, proceedings of the International Federation on Automatic Control (IFAC) Mechatronics 2006 Conference, Heidelberg, Germany, September 2006.
  62. H. Bassily, R. Sekhon, and J. Wagner, “Stationary Gas Turbines – A Real Time Dynamic Model with Experimental Validation”, proceedings of the 2006 American Controls Conference, paper WeC13.1, pp. 1838-1844, Minneapolis, MN, June 2006.
  63. J. Chastain, H. Smith, M. Morehead, D. Moline, and J. Wagner, “Senior Mechanical Engineering Laboratory at Clemson University – Experiments, Learning Objectives, and Assessment”, proceedings of the ASEE Annual Conference, Chicago, IL, June 2006.
  64. J. Chastain and J. Wagner, “Advanced Thermal Management for Internal Combustion Engines – Valve Design, Component Testing, and Block Redesign”, proceedings of the 2006 SAE World Congress, SAE paper no. 2006-01-1232, Detroit, MI, April 2006.
  65. H. Bassily and J. Wagner, “A Stochastic Approach to Dynamic System Modeling with Application to Gas Turbines”, proceedings of the ASME IMECE, Dynamic Systems & Controls Division – Identification Panel, IMECE2005-79385, Orlando, FL, November 2005.
  66. C. Simoson and J. Wagner, “Advanced Automotive Engine Thermal Management – Simplified Diesel Engine Model and Experimental Validation”, proceedings of the ASME IMECE, Dynamic Systems & Controls Division – Automotive and Transportation Systems Technical Committee, IMECE2005-79893, Orlando, FL, November 2005.
  67. S. Ganta and J. Wagner, “A Power Flow Diagnostic Framework for Multi-Domain Dynamic Systems with Application to Drive-by-Wire Ground Vehicles”, proceedings of the 2005 American Controls Conference, pp. 465-471, Portland, OR, June 2005.
  68. S. Ancha, A. Baviskar, J. Wagner, and D. Dawson, “Modeling, Analysis, and Control of a Four Wheel Steer-by-Wire System for Semi-Autonomous Ground Vehicles”, proceedings of the ASME IMECE, Dynamic Systems & Control Division – Automotive & Transportation Systems Panel, IMECE2004-59214, Anaheim, CA, November 2004.
  69. U. Mandhata, R. Parker, J. Wagner, D. Dawson, and B. Post, “Investigation of Operator Feedback in Human-Machine Haptic Interface Steer-by-Wire Transportation Systems”, proceedings of the ASME IMECE, Dynamic Systems & Control Division – Robotics Panel, IMECE2004-59213, Anaheim, CA, November 2004.
  70. J. Eberth, J. Wagner, B. Afshar, and R. Foster, “Modeling and Validation of Automotive ‘Smart’ Thermal Management System Architectures”, proceedings of the 2004 SAE World Congress, SAE paper no. 2004-01-0048, note: collaborative publication with Mark IV Automotive, Detroit, MI, March 2004.
  71. D. Cimba, K. Gilbert, and J. Wagner, “Active Torsion Bar Body Roll Minimization System – Design and Testing”, proceedings of the ASME IMECE, Dynamic Systems and Control Division, IMECE2003-41953, Washington, DC, November 2003.
  72. M. Ghone and J. Wagner, “A Multi-Disciplinary Mechatronics Laboratory”, proceedings 2003 ASEE Annual Conference, Nashville, TN, June 2003.
  73. P. Setlur, J. Wagner, D. Dawson, and J. Chen, “Nonlinear Controller for Automotive Thermal Management Systems”, proceedings of the 2003 American Controls Conference, vol. 6, pp. 4699-4704, Denver, CO, June 2003.
  74. J. Wagner, V. Srinivasan, E. Marotta, and D. Dawson, “Smart Thermostat and Coolant Pump Control for Engine Management Systems”, proceedings of the 2003 SAE World Congress, SAE paper no. 2003-01-0272, Detroit, MI, March 2003.
  75. P. Setlur, D. Dawson, J. Chen, and J. Wagner, “A Nonlinear Tracking Controller for a Haptic Interface Steer-by-Wire Systems”, proceedings of the IEEE Conference on Decision and Control, vol. 3, pp. 3112-3117, Las Vegas, NV, December 2002.
  76. J. Chen, W. Dixon, J. Wagner, and D. Dawson, “Exponential Tracking Control of a Hydraulic Proportional Directional Valve and Cylinder Via Integrator Backstepping”, proceedings of the ASME IMECE, Dynamic Systems and Control Division, vol. 71, pp. 895-906, New Orleans, LA, November 2002.
  77. B. Samuels, J. Wagner, P. Setlur, and D. Dawson, “Power Split CVT Modeling with Spool Valve Actuation”, proceedings of the ASME IMECE, Dynamic Systems and Control Division, vol. 71, pp. 665-674, New Orleans, LA, November 2002.
  78. V. Mills, J. Wagner, and I. Haque, “Fourier Series Neural Network Analysis of a Steer-by-Wire System”, proceedings of the ASME IMECE, Design Engineering Division, vol. 115, pp. 121-127, New Orleans, LA, November 2002.
  79. P. Setlur, D. Dawson, J. Wagner, and Y. Fang, “Nonlinear Tracking Controller Design for Steer-by-Wire Automotive Systems”, proceedings of the American Controls Conference, vol. 1, pp. 280-285, Anchorage, AK, May 2002.
  80. J. Wagner, M. Ghone, D. Dawson, and E. Marotta, “Coolant Flow Control Strategies for Automotive Thermal Management Systems”, proceedings of the 2002 SAE World Congress, SAE paper no. 2002-01-0713, Detroit, MI, March 2002.
  81. Z. Liu and J. Wagner, “Nonlinear Model Reduction for Automotive System Models”, proceedings of the ASME IMECE, Dynamic Systems and Control Division, vol. 70, pp. 135-142, New York, NY, November 2001.
  82. V. Mills, J. Wagner, and D. Dawson, “Nonlinear Modeling and Analysis of Automotive Steering Systems for Hybrid Vehicles”, proceedings of the ASME IMECE, Design Engineering Division, vol. 112, pp. 173-180, New York, NY, November 2001.
  83. J. Wagner, E. Marotta, and I. Paradis, “Thermal Modeling of Engine Components for Temperature Prediction and Fluid Flow Regulation”, proceedings of the 2001 SAE World Congress, SAE paper no. 2001-01-1014, Detroit, MI, March 2001.
  84. J. Wagner, D. Dawson, and Z. Liu, “Nonlinear Air-to-Fuel Ratio and Engine Speed Control for Spark Ignition Engines”, proceedings of the ASME ICEME, Dynamic Systems and Control Division, vol. 69-1, pp. 633-640, Orlando, FL, November 2000.
  85. V. Mills, B. Samuels, J. Wagner, J. Smith, and R. Layton, “Modeling, Analysis, and Experimental Testing of ABS Systems with Load Shifting”, proceedings ASME IMECE, Design Engineering Division, DE-Vol. 106, pp. 85-92, Orlando, FL, Nov 2000.
  86. J. Wagner and X. Liu, “Nonlinear Modeling and Control of Automotive Vibration Isolation Systems”, proceedings of the American Controls Conference, pp. 564-568, Chicago, June 2000.
  87. J. Wagner and X. Liu, “An Active Vibration Isolation System for Vehicle Seats”, proceedings of the 2000 SAE World Congress, SAE paper no. 2000-01-0725, Detroit, MI, March 2000.
  88. R. Nichols, B. Ramsey, E. Marotta, and J. Wagner, “Thermal Periodic Contact of Exhaust Valves in Spark Ignition Internal Combustion Engines for Improved Control Performance”, proceedings of the AIAA Aerospace Sciences Meeting, AIAA-2000-0878, Reno, NV, January 2000.
  89. J. Wagner and W. Cheek, “Model Development for Spark Ignition Utility Engines to Support Control Algorithm Designs”, proceedings of the ASME IMECE, Dynamic Systems and Control Division, DSC-Vol. 67, pp. 167-177, Nashville, November 1999.
  90. J. Wagner and M. Momot, “Performance Comparison of Nonlinear and Intelligent Control Strategies on the Ball and Beam Dynamic System”, proceedings of the ASME IMECE, Dynamic Systems and Control Division, DSC-Vol. 67, pp. 487-501, Nashville, TN, November 1999.
  91. J. Wagner, “Evolving Industry Expectations for Engineers – The Impact of Global Manufacturing”, proceedings of the ASEE conference, Session 3522, pp. 1-6, Charlotte, NC, June 1999.
  92. J. Wagner, J. Keane, R. Koseluk, and W. Whitlock, “Knock Detection Systems: Products, Tools, and Emerging Research”, proceedings of the 1998 SAE World Congress, SAE paper no. 980522, Detroit, MI, March 1998.
  93. K. Butler and J. Wagner, “A Strategy to Demonstrate the Compliance of Automotive Controller Software to Systems Requirements Using Simulation Technology”, SAE paper no. 940492, March 1994.
  94. J. Wagner, R. Mayne, and R. Chen, “Relative Performance of Formulation and
    Search Strategies in Dynamic System Optimization”, proceedings of the ASME WAM, Dynamic Systems and Control Division, Chicago, IL, December 1988.
  95. J. Wagner and R. Shoureshi, “Observer Designs for Diagnostics of Nonlinear Processes and Systems”, proceedings of the ASME WAM, Dynamic Systems and Control Division, WA/DSC-5, 9p, Chicago, IL, December 1988.
  96. J. Wagner and R. Shoureshi, “A Robust Failure Diagnostic Scheme for Nonlinear Thermofluid Processes”, proceedings of the American Controls Conference, pp. 1877-1882, Minneapolis, MN, June 1987.
  97. J. Wagner and R. Shoureshi, “Observer Design and Failure Detection Diagnostics for
    Heat Pumps”, proceedings of the ASME WAM, Dynamic Systems and Control Division, 86-WA/DSC-11, 8p, Anaheim, CA, December 1986.

Conference Proceedings (Unreviewed):

  1. P. Setlur, J. Wagner, D. Dawson, and L. Powers, “A Hardware-in-the-Loop and Virtual Reality Test Environment for Hybrid Vehicle Steer-by-Wire System Evaluations”, proceedings of the 2003 American Controls Conference, vol. 3, pp. 2584-2589, Denver, CO, June 2003.
  2. N. Jalili, J. Wagner, and M. Dadfarnia, “Design and Development of a Piezoelectric-Based Camless Automotive Engine Valve”, proceedings of the 2002 Mechatronics Conference, Enschede, Netherlands, June 2002.
  3. P. Setlur, J. Wagner, D. Dawson, and B. Samuels, “Nonlinear Control of a Continuously Variable Transmission for Hybrid Vehicle Powertrains”, proceedings of the American Controls Conference, vol. 2, pp. 1304-1309, Arlington, VA, June 2001.
  4. R. Conatser and J. Wagner, “Health Monitoring for Automotive Electronic Throttle Control Systems”, proceedings of the 7th Mechatronics Forum International Conference, Atlanta, GA, September 2000.