G. Diaz-Armas, A.P. Cervantes-Gonzalez, R. Martinez-Duarte and V.H. Perez-Gonzalez, “Electrically-driven microfluidic platforms for exosome manipulation and characterization” Electrophoresis, 43, 327-339 (2022).

R. Martinez-Duarte “A critical review on the fabrication techniques that can enable higher throughput in dielectrophoresis devices” Electrophoresis, 43, 232-248 (2022)

R. Martinez-Duarte, “Beyond Stone-Age Sample Prep” The Pathologist/The Analytical Scientist, Issue#0517, May (2017). PDF

R. Martinez-Duarte “Fabrication Challenges and Perspectives on the use of Carbon-electrode Dielectrophoresis in Sample Preparation” IET Nanobiotechnology (2016). Invited Critical Review. Accepted Manuscript 

T. Benavidez, R. Martinez-Duarte and C. Garcia, “Analytical Methodologies Using Carbon Substrates developed by Pyrolysis” Analytical Methods, 8, 4163-4176(2016). Invited Review. Front Cover.

J. Gilmore, M. Islam and R. Martinez-Duarte, “The challenges to the use of Compact Disc-based Centrifugal Microfluidics for Healthcare Diagnostics at the Extreme Point of Care” Micromachines, 7, (4), 52 (2016). Invited Review. Open Access.

M. Islam, R. Natu and R. Martinez-Duarte, “Carbon MEMS for Selected Lab-on-a-chip applications” in “Carbon: The Next Silicon” edited by V. Perez, B. Pramanick and M. Madou. Momentum Press (2015).

M. Islam, R. Natu and R. Martinez-Duarte, “C-MEMS” in “Encyclopedia of Nanotechnology” edited by B. Bhushan. Springer (2015). Accepted Manuscript

Martinez-Duarte, “SU-8 Photolithography as a Toolbox for Carbon MEMS”. Micromachines, 5, (3), 766-782 (2014). Invited Review published in the special issue: 15 years of SU-8 as MEMS material. Open Access

R. Martinez-Duarte, “Microfabrication Technologies in Dielectrophoresis Applications – a review”, Electrophoresis, 33, 3110-3132 (2012). Accepted Manuscript

R. Martinez-Duarte and M. Madou. “SU-8 Photolithography and its impact on Microfluidics” in Microfluidics and Nanofluidics Handbook – Fabrication, Implementation and Applications edited by S. Mitra and S. Chakraborty. CRC Press/Taylor & Francis Group, 231-268 (2011). PDF R. Martinez-Duarte, G. Turon Teixidor, P. Mukherjee, Q. Kang and M. J. Madou,
“Perspectives of Micro and Nanofabrication of Carbon for Electrochemical and Microfluidic Applications” in Microfluidics and Microfabrication edited by S. Chakraborty, Springer, 181-263 (2009). PDF